GD SERIES PHOTOELECTRIC SENSOR
|
| Opposed mode: |
 |
M8: sn=80mm_/ 150mm____ M12: sn= 5.2 m_____ M18: sn=15m; |
| Diffuse mode: |
 |
M12: sn=200mm___ M18: sn= 500mm,150mm(Narrow Light) |
| Retroreflective mode: |
 |
M12: sn=2m, (With Polarizing Fitters) |
|
M18: sn=3m, (With Polarizing Fitters) |
| GD SERIES PHOTOELECTRIC SENSORS SPECIFICATIONS(DC) | ||||
| TYPE / Item | Diffuse reflective | Retroreflective | Retroreflective | Through-beam |
| With polarizing filters | ||||
| Supply Voltage | 10 to 30V DC Ripple P-P 10% or less | |||
| Current consumption | ≤30mA | |||
| Output |
NPN output type: _NPN open-collector transistor, Applied voltage: 30V DC or less, Maximum sink current: 150mA Voltage drop: 2.5V or less PNP output type:_ PNP open-collector transistor, Applied voltage: 30V DC or less , Maximum sink current: 150mA Voltage drop: 2.5V or less
|
|||
| Output operation | Selectable either Light-ON Dark-ON by type number or by the control input wire | |||
| Short-circuit protection | Yes | |||
| Reverse polarity protection | Yes | |||
| Overload current protection | Yes | |||
| Response time | 1ms | |||
| Operation indicator | Red LED (light up when the output is activated) | |||
| Pollution degree | 3(Industrial environment) | |||
| Protection | IP67(IEC) | |||
| Ambient temperature | -25 to+55 °C | |||
| Ambient humidity | 35to 85% RH | |||
| EMC | IEC 60947-5-2, Parts7.2.6.1.2.3 或 RFI>3V/m(in 30-1000MHZ), EFT>1KV, ESD>4KV(contact) | |||
| Voltage Withstand Ability | IEC 60947-5-2, Part8.3.3.4 or 500VDC for one min, between all supply terminals connected together and enclosure | |||
| Insulation Resistance | >20MΩ, With 500v dc megger between all supply terminals connected together and enclosure | |||
| Vibration Resistance | IEC 60947-5-2, Part 7.4.2 or 10-55HZ, 1.0mm amplitude in x, y and z directions for 30 min | |||
| Shock Resistance | IEC 60947-5-2, Part 7.4.1 or 30g 11ms in x, y and z directions for six time each | |||
| Emitting element | Infrared LED |
Red LED
|
Infrared LED | |
| Material | Enclosure: PBT | |||
| Cable | cable 2m long with 3 or 4 conductors | |||
| GD SERIES PHOTOELECTRIC SENSORS SPECIFICATIONS(AC) | ||||
|
TYPE / Item |
Diffuse reflective | Retroreflective | Retroreflective | Through-beam |
| With polarizing filters | ||||
| Supply Voltage | ≤ 5mA | |||
| Current consumption | 24 至 240V AC ±10% | |||
| Output |
AC non-contact (thyristor output) , Applied voltage: 24 to 240V AC ±10%, Max. Load current: 200mA , Voltage drop: 10V AC or less |
|||
| Output operation | Selectable either Light-ON Dark-ON by type number | |||
| Overload current protection | Yes | |||
| Response time | 15ms | |||
| Operation indicator | Red LED (light up when the output is activated) | |||
| Pollution degree | 3(Industrial environment) | |||
| Protection | IP67(IEC) | |||
| Ambient temperature | -25 C 至 +55 C | |||
| Ambient humidity | 35 至 85% RH | |||
| EMC | IEC 60947-5-2, Parts7.2.6.1.2.3 or RFI>3V/m(in 30-1000MHZ), EFT>1KV, ESD>4KV(contact) | |||
| Voltage Withstand Ability | IEC 60947-5-2, Part8.3.3.4 or 500VDC for one min, between all supply terminals connected together and enclosure | |||
| Insulation Resistance | >20MΩ, With 500v dc megger between all supply terminals connected together and enclosure | |||
| Vibration Resistance | IEC 60947-5-2, Part 7.4.2 or 10-55HZ, 1.0mm amplitude in x, y and z directions for 30 min | |||
| Shock Resistance | IEC 60947-5-2, Part 7.4.1 or 30g 11ms in x, y and z directions for six time each | |||
| Emitting element | Infrared LED |
Red LED
|
Infrared LED | |
| Material | Enclosure: PBT | |||
| Cable | cable 2m long with 3 or 4 conductors | |||
| GD SERIES PHOTOELECTRIC SENSORS CONNECTION DIAGRAM |
| M8 sensors wiring diagrams(DC) |
 Receiver: NPN output wiring diagram
|
 --------------
|
|
Receiver: PNP output wiring diagram
|
 -------------- 
|
| Emitter wiring diagram |
 -------------- 
|
| M12 sensors wiring diagrams (DC) |
|
Receiver: NPN output wiring diagram
|
 ------------- ------------ 
|
|
Receiver: PNP output wiring diagram
|
 ------------  -------------
|
|
Emitter wiring diagram
|
 ------------ -------------
|
| M18 sensors wiring diagrams(DC) |
|
Receiver: NPN output wiring diagram
|
  ------------  
|
|
Receiver: PNP output wiring diagram
|
  ------------
|
|
Emitter wiring diagram
|
|
|
| M18 sensors circuit and wiring diagrams(AC) |
| Emitter of thru-beam wiring diagram |
  --------------  
|
| Receiver of thru-beam, tetroreflective & diffuse reflective sensor wiring diagram |
 --------------  
|
| GD SERIES PHOTOELECTRIC SENSORS DIMENSIONS (mm) | |
| M8 SENSORS DIMENSIONS | |
 
|
 
|
| M12 SENSORS DIMENSIONS (Brass Housing Series) | |
 
|
 
|
 
|
|
| M12 SENSORS DIMENSIONS (Plastic Housing Series) | |
 
|
 
|
 
|
|
| M18 SENSORS DIMENSIONS (Brass Housing Series) | |
 
|
 
|
| M18 SENSORS DIMENSIONS (Plastic Housing Series) | |
 
|
 
|
